TrendVario 4000

The premium semi-automatic parking system without a pit that can be driven through

The TrendVario 4000 can be combined with other TrendVario models

Unlike the other semi-automatic parking system models, the TrendVario 4000 can be driven through. This means that it can be easily combined with the TrendVario 4100, 4200 or 4300 systems as an additional row of parking. As no second access lane is required, this sort of combined parking system enables you to have even more parking spaces within the same floor area.

The TrendVario 4000 accommodates two vehicles, one above the other. The parked vehicles are moved vertically and horizontally, and automatically transported to the desired position. For maximum operating safety, the access level is secured from the entire system by gates.

Your personal representative for the TrendVario 4000

All the information relating to the TrendVario 4000

Specification

  • For independent parking
  • In combination with the TrendVario 4100, 4300 and 4200 for 3 to 29 vehicles (plus vacant space) in 2 to 15 grids (2 vehicles on top of each other)
  • Total height: 330 cm to 440 cm
  • Pit depth: not required
  • Vehicle dimensions: height 150 to 205 cm, length 500 to 520 cm
  • Usable platform width: 230 cm to 270 cm
    Standard design: 2,000 kg per parking space, optional max. 2,600 kg
  • Individual parking spaces can even be loaded later on
  • Horizontal access to all parking levels
  • Platform coating: StandardGrip, optional AluLongLife or EasyWalk (ground floor pallet only available with EasyWalk)
  • Operation via SmartChip, SmartPortable or SmartApp

Field of application

  • In residential and commercial buildings in large cities
  • For more parking spaces in office buildings or residential and commercial buildings
  • To increase capacity in underground car parks or parking garages, e.g. of hotels
  • More parking spaces for car dealerships, car rental companies or vintage car collections

Specification – Gates

  • Standard gates: manual sliding gates on the sides
  • Electrically operated sliding gates as an option (remote control possible)
  • Around 50 individual variations are possible in different materials and colours
  • Gate frame made from extruded aluminium profiles with a vertical centre stay bar
  • Standard gating material: perforated steel plate
  • Glass (laminated safety glass), wood (Nordic spruce), aluminium, steel and many other options available
  • Interchangeable panels and segments
  • Alternatively, also available with electrically operated roller shutter gates

Overview of gates variants

Perforated steel plate
Type:

Thickness 1 mm, RV 5/8, hot-dip, layer thickness approx. 20 μm
Ventilation cross-section of the panelling approx. 40%
Not suitable for external garages (e.g. next to the building)

Perforated steel plate

Type:

  • Thickness 1 mm, RV 5/8, hot-dip, layer thickness approx. 20 μm
  • Ventilation cross-section of the panelling approx. 40%
  • Not suitable for external garages (e.g. next to the building)
Plain aluminium sheet
Type:

Thickness 2 mm, E6/EV1, anodized, layer thickness approx. 20 μm

Plain aluminium sheet

Type:

  • Thickness 2 mm, E6/EV1, anodized, layer thickness approx. 20 μm
Perforated aluminium plate
Type:

Thickness 2 mm, RV 5/8 E6/EV1, anodized, layer thickness approx. 20 μm
Ventilation cross-section of the panelling approx. 40%

Perforated aluminium plate

Type:

  • Thickness 2 mm, RV 5/8 E6/EV1, anodized, layer thickness approx. 20 μm
  • Ventilation cross-section of the panelling approx. 40%
Holzfüllung nordische Fichte
Ausführung

nordische Fichte in A-Sortierung
senkrechte Nut- und Federbretter
farblos vorimprägniert

Holzfüllung nordische Fichte

Ausführung

  • nordische Fichte in A-Sortierung
  • senkrechte Nut- und Federbretter
  • farblos vorimprägniert
Laminated safety glass
Type:

LSG consisting of ESG 8/4 mm

Laminated safety glass

Type:

  • LSG consisting of ESG 8/4 mm
Wire grating, hot-dip
Type:

Mesh size 12×12 mm
Alternative: mesh size 40×40 mm (only for manual sliding doors)

Wire grating, hot-dip

Type:

  • Mesh size 12×12 mm
  • Alternative: mesh size 40×40 mm (only for manual sliding doors)
Beaded steel plate
Type:

Thickness 1 mm, hot-dip, layer thickness approx. 20 μm
Additional powder coating
Layer thickness approx. 25 μm on the outside and approx. 12 μm on the inside
Many RAL colours available

Beaded steel plate

Type:

  • Thickness 1 mm, hot-dip, layer thickness approx. 20 μm
  • Additional powder coating
  • Layer thickness approx. 25 μm on the outside and approx. 12 μm on the inside
    Many RAL colours available
Electric roller shutter gates
Type

Aluminium, extruded
Powered electrically by means of tube motor in the shaft
Lacquered type, choice of three RAL colours available

 
 

Electric roller shutter gates

Type

  • Aluminium, extruded
  • Powered electrically by means of tube motor in the shaft
  • Lacquered type, choice of three RAL colours available
 

 


Further visualizations of the TrendVario 4000

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

The different product variants of the TrendVario 4000