TrendVario 4200

The semi-automatic parking system without a pit

Can also be retrofitted

As the TrendVario 4200 does not require a pit, it can be retrofitted in existing properties with sufficient room height. The semi-automatic parking system is accessed at ground level without a ramp or the like. It can accommodate two vehicles one above the other, and the parking platforms are moved vertically and horizontally.

An automatic control system transports the selected parking space to the desired position.

The access level is secured by gates, which can only be opened once the shifting process is complete. This protects the up to 29 parked vehicles from theft and vandalism.
All the information relating to the TrendVario 4200

Your personal representative for the TrendVario 4200:

All the information relating to the TrendVario 4200

Spezifikation

  • For independent parking
  • Accommodates 3 to 29 vehicles (plus vacant space) in 2 to 15 grids (2 vehicles on top of each other)
  • Total height: 330 cm to 450 cm
  • No pit required
  • Vehicle dimensions: height 150 to 205 cm, length 500 to 520 cm
  • Usable platform width: 230 cm to 270 cm
    Standard design: 2,000 kg per parking space, optional max. 2,600 kg.
  • Individual parking spaces can even be loaded later on
  • Horizontal access to all parking levels
  • Platform coating: StandardGrip, optional AluLongLife or EasyWalk.
  • Operation via SmartChip, SmartPortable or SmartApp

Field of application

  • Residential and commercial buildings
  • Office buildings
  • To increase capacity in underground car parks or parking garages, e.g. of hotels
  • More parking spaces for car dealerships, car rental companies or vintage car collections

Specification – Gates

  • Standard gates: manual sliding gates on the sides
  • Electrically operated sliding gates as an option (remote control possible)
  • Around 50 individual variations are possible in different materials and colours
  • Gate frame made from extruded aluminium profiles with a vertical centre stay bar
  • Standard gating material: perforated steel plate
  • Glass (laminated safety glass), wood (Nordic spruce), aluminium, steel and many other options available
  • Interchangeable panels and segments
  • Alternatively, also available with electrically operated roller shutter gates

Overview of gates variants

Perforated steel plate
Type:

Thickness 1 mm, RV 5/8, hot-dip, layer thickness approx. 20 μm
Ventilation cross-section of the panelling approx. 40%
Not suitable for external garages (e.g. next to the building)

Perforated steel plate

Type:

  • Thickness 1 mm, RV 5/8, hot-dip, layer thickness approx. 20 μm
  • Ventilation cross-section of the panelling approx. 40%
  • Not suitable for external garages (e.g. next to the building)
Plain aluminium sheet
Type:

Thickness 2 mm, E6/EV1, anodized, layer thickness approx. 20 μm

Plain aluminium sheet

Type:

  • Thickness 2 mm, E6/EV1, anodized, layer thickness approx. 20 μm
Perforated aluminium plate
Type:

Thickness 2 mm, RV 5/8 E6/EV1, anodized, layer thickness approx. 20 μm
Ventilation cross-section of the panelling approx. 40%

Perforated aluminium plate

Type:

  • Thickness 2 mm, RV 5/8 E6/EV1, anodized, layer thickness approx. 20 μm
  • Ventilation cross-section of the panelling approx. 40%
Wooden panelling, Nordic spruce
Type

Nordic spruce, grade A
Vertical tongue and groove boards
Preimpregnated (colourless)

Wooden panelling, Nordic spruce

Type

  • Nordic spruce, grade A
  • Vertical tongue and groove boards
  • Preimpregnated (colourless)
Laminated safety glass
Type:

LSG consisting of ESG 8/4 mm

Laminated safety glass

Type:

  • LSG consisting of ESG 8/4 mm
Wire grating, hot-dip
Type:

Mesh size 12×12 mm
Alternative: mesh size 40×40 mm (only for manual sliding doors)

Wire grating, hot-dip

Type:

  • Mesh size 12×12 mm
  • Alternative: mesh size 40×40 mm (only for manual sliding doors)
Beaded steel plate
Type:

Thickness 1 mm, hot-dip, layer thickness approx. 20 μm
Additional powder coating
Layer thickness approx. 25 μm on the outside and approx. 12 μm on the inside
Many RAL colours available

Beaded steel plate

Type:

  • Thickness 1 mm, hot-dip, layer thickness approx. 20 μm
  • Additional powder coating
  • Layer thickness approx. 25 μm on the outside and approx. 12 μm on the inside
  • Many RAL colours available
Electric roller shutter gates
Type

Aluminium, extruded
Powered electrically by means of tube motor in the shaft
Lacquered type, choice of three RAL colours available

Electric roller shutter gates

Type

  • Aluminium, extruded
  • Powered electrically by means of tube motor in the shaft
  • Lacquered type, choice of three RAL colours available

Further visualizations of theTrendVario 4200

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

The different product variants of the TrendVario 4200